|
Post by Cristian Anghelache on Jan 13, 2011 14:55:22 GMT 2
|
|
|
Post by emilia90 on Jan 18, 2011 17:58:26 GMT 2
As avea si eu nevoie de cateva informatii cu privire la o masa de skandenberg... As dori sa cumpar una si nu prea gasesc, ma ajuta cineva , va rog
|
|
|
Post by Cristian Anghelache on Jan 18, 2011 18:00:52 GMT 2
As avea si eu nevoie de cateva informatii cu privire la o masa de skandenberg... As dori sa cumpar una si nu prea gasesc, ma ajuta cineva , va rog Emilia, mai intai trebuie sa te prezinti: sknx.proboards.com/index.cgi?board=regulament
|
|
|
Post by Cristian Anghelache on Jan 19, 2011 10:22:53 GMT 2
|
|
|
Post by Cristian Anghelache on Jan 21, 2011 13:36:35 GMT 2
|
|
|
Post by Cristian Anghelache on Jan 23, 2011 2:00:15 GMT 2
|
|
|
Post by Tiberiu Mihalcea on Jan 23, 2011 18:08:25 GMT 2
Super tare masa. Cel mai interesant mi se pare faptul ca au pus pin line-urile pe diagonale.
|
|
|
Post by Adrian Constantin on Jan 23, 2011 19:11:04 GMT 2
Intradevar, arata foarte bine, dar nici eu nu imi explic de ce au pin'urile in diagonala si pad'urile pe mijloc... Am observat ca pe mine ma dezavantajeaza mult daca sunt padurile pe mijloc ;D
|
|
|
Post by szaszpetrut on Jan 23, 2011 19:45:05 GMT 2
arata foarte bine cea cu pantera
|
|
|
Post by Tiberiu Mihalcea on Jan 23, 2011 23:09:08 GMT 2
Intradevar, arata foarte bine, dar nici eu nu imi explic de ce au pin'urile in diagonala si pad'urile pe mijloc... Am observat ca pe mine ma dezavantajeaza mult daca sunt padurile pe mijloc ;D Se vede in ultima poza ca padurile pot fi puse si pe diagonala.
|
|
|
Post by Cristian Anghelache on Mar 2, 2011 1:08:22 GMT 2
|
|
|
Post by Cristian Anghelache on Apr 25, 2011 8:45:44 GMT 2
ITEM 6 ·EQUIPMENT SPECIFICATIONS a) Table: Sit down: 28″ from floor to top of table. Stand-up: 40″ from floor to top of table. All other specifications are identical for both sit down and stand-up table tops. b) Table top: 36″ across and 26″ deep. c) Elbow Pads: 7″x 7″ square shape. 2″ thick, made of heavy high quality foam material, covered with a vinyl/rexin type cover. The foam and covering can be attached to a 1/8″ metal sheet, 7″x 7″ with two threaded bolts 1/4″ diameter x 1 3/4″ long, welded to the bottom to be able and attach your elbow pads to the table top. A line, either painted, upholstered or taped from hand grip to hand grip to establish center of the table will always be used at WAF tournaments. d) Touch Pads: 10″ long x 4″ high. Made of good quality Touch Pad e) Placement: Elbow pads should be set 2″ from their respective edge. They should overlap each other by 1/2 to the right of center for a right arm table and overlap each other by 1/2 to the left of center for a left arm table. f) Touch Pads: Should be on an angle, 5″ out from the inside corner of the elbow pad to the inside corner of the pad and 1/2″ from its respective edge measured to the outside corner of the pad. Running at an angle towards the hand peg it should measure 2 3/4″ from the hand peg to the outside corner of the touch pad. If it’s for a right arm table, these measurements should be made on the left side of the elbow pad and reversed if it’s a left arm table. g) Hand Pegs: Should be placed midway at 13″ on each edge of the table, 1″ in from the edge. The peg itself should be 1″ in diameter and 6″ high form the table top. " Sursa: cookbob.wordpress.com/2011/04/24/armwrestling-table-dimensions-inch-cm/
|
|
|
Post by Cristian Anghelache on May 6, 2011 14:01:22 GMT 2
A mai fost pus si inainte, dar il pun din nou, ca sa fie mai usor de gasit: Mazurenko Catalog
|
|
|
Post by Marius George Petrache on May 7, 2011 1:59:29 GMT 2
aia cu rosu e chiar frumoasa
|
|
|
Post by Adrian Teodorescu on May 9, 2011 9:38:28 GMT 2
Uite si preturile de la Mazurenko. Transportul se invarte pe la 100 euro pana in Romania. Attachments:
|
|